中文
ENGLISH
When it comes to the tape, most people think of the pipe to install the winding tape, but in many cases, the raw meal belt is also used in various machines, such as water dispenser. As the temperature of water dispenser varies, it is very important to understand the temperature resistance of the raw meal band.
How much temperature does the raw meal band have? If you do not look at the experimental data, it can be directly used in the large drinking water supply system, indicating that the raw meal band can withstand temperature of 100 degrees or higher. Some of the special raw meal belts used in gas pipelines have better heat resistance.
How much temperature does the raw meal band have? Because the material of the raw meal belt is polytetrafluoroethylene, the temperature resistance of the raw meal band is excellent. The weight loss rate (%) of polytetrafluoroethylene at 260, 370, and 420 DEG C is 1 * 10-4, 4 * 10-3 and 9 * 10-2 respectively. Visible, polytetrafluoroethylene can be used at 260 degrees for a long time, low temperature - at -100 degrees still soft. Only slightly above 300 DEG C, slightly soluble in total alkane (about 0.1g/100g). PTFE does not absorb moisture or non flammable, and is extremely stable for oxygen and ultraviolet light, so the raw meal band has excellent temperature resistance.
Therefore, when we use the raw meal belt, we do not need to pay too much attention to the temperature resistance of the raw meal band, and there is very little quality problem.
How much temperature does the raw meal band have? If you do not look at the experimental data, it can be directly used in the large drinking water supply system, indicating that the raw meal band can withstand temperature of 100 degrees or higher. Some of the special raw meal belts used in gas pipelines have better heat resistance.
How much temperature does the raw meal band have? Because the material of the raw meal belt is polytetrafluoroethylene, the temperature resistance of the raw meal band is excellent. The weight loss rate (%) of polytetrafluoroethylene at 260, 370, and 420 DEG C is 1 * 10-4, 4 * 10-3 and 9 * 10-2 respectively. Visible, polytetrafluoroethylene can be used at 260 degrees for a long time, low temperature - at -100 degrees still soft. Only slightly above 300 DEG C, slightly soluble in total alkane (about 0.1g/100g). PTFE does not absorb moisture or non flammable, and is extremely stable for oxygen and ultraviolet light, so the raw meal band has excellent temperature resistance.
Therefore, when we use the raw meal belt, we do not need to pay too much attention to the temperature resistance of the raw meal band, and there is very little quality problem.